ROOF VENTILATION

Roof Ventilation

G RANGE SLATE & TILE VENTILATORS

Glidevale G range slate and tile ventilators are Roof Ventilation designed to ventilate through the roof slope and form an integral part of a slate or tile roof covering. They can be used at low or high level where the roof construction does not allow eaves or ridge ventilators to be used, or where complex roof shapes do not allow effective cross ventilation.

  • Range of ventilation areas from 5,000mm²/m to 20,000mm²/m.
  • The smallest, least obtrusive cowls available for the air capacity.
  • Colour matched as standard to blend in with adjacent tiles or slates.
  • Colour blending service for unusual tiles and slates, specials and old weathered tiles and slates.
  • Easily converted for use as svp or mechanical extract terminals.
  • Fire resistant. Designated AA rating to BS476: Part 3.

VERSA-TILE G5 VENTILATOR TERMINAL

Glidevale Versa-Tile G5 is the ultimate universal tile ventilator and terminal solution for stockists, merchants and roofing contractors.

The versatile design resolves the problem of tile profile matching with a single solution for all. It can be used for all roof space ventilation requirements and can also be adapted into an SVP and mechanical extraction terminal by means of a pipe adaptor and flexible pipe.

  • Universal design suits virtually all interlocking single lap tiles.
  • New lower profile
  • Available in 6 UV-stable house colours of red, brown, grey, black, terracotta and red streak.
  • Proven in use for over 15 years.
  • Incorporating AluFlash on the leading front edge for ultimate weathering and wind uplift security.
  • Driving and deluge rain resistance demonstrated by test.
  • Guaranteed 20,000 mm² ventilation.
  • Designed and developed under BS EN ISO 9001.

UNIVERSAL IN-LINE® SLATE AND TILE VENTILATORS

In addition to its range of dedicated IN-LINE®profiles Glidevale can now offer a compact range of 4 key ventilators that will cover the majority of your roof covering requirements. The result is a simplified stock offering, ideal for both roofing and builders merchants.

Glidevale Universal IN-LINE® slate and tile ventilators have been designed to provide an aesthetic and unobtrusive solution to roof space ventilation. They can be used at low or high level where the roof construction does not allow eaves or ridge ventilators to be used, or where complex roof shapes do not allow effective cross ventilation.

  • Universal slate ventilator will work with the majority of slate sizes available.
  • Universal flat Interlocking ventilator will work with most flat tiles.
  • Universal plain tile ventilator will work with all plain tiles both clay and concrete.
  • Universal interlocking plain tile will work with the major interlocking plain tiles.
  • Colour matched as standard to blend in with adjacent tiles or slates.
  • Simply installed as part of the normal slating/tiling process.
  • Fire resistant. Designated AA rating to BS476: Part 3.
  • Easily converted for use as svp or mechanical extract terminals.

ROOF VENTILATION

SV SOFFIT VENTILATORS

Glidevale SV Soffit Ventilators are for installation at eaves with a projecting soffit and must always be used with RV Rafter Ventilators.

  • Can be used with all common soffit board materials.
  • Suitable for new roofs or refurbishment.
  • Colours to match stained or painted soffit boards.
  • Options to provide ventilation openings of 10,000mm²/m or 25,000mm²/m.
  • Independent of Rafter spacings.
  • Quick and easy to install with no special tools required.

 

Scroll to Top